kilo ampere switch

Typical Applications

" Performance Tested"

The kA Switch module has many diverse applications including electrochemical processes, refinery and plating operations, rectifier bypass operations, etc. The switch module can be used in indoor or outdoor applications. The kA module design can be easily adapted to replace oher existing high current switches.

kA can design a high current switch to meet your exact specification by ganging the needed modules to optain your desired ampere rating and any framework, adapters or options you require.

 

high current switch

80kA Portable Cell Switch


Mechanical Operation:
On a pneumatically operated 20 module switch, with a gang switching time of 2.0 seconds, the synchronization of modules was within 0.28 seconds.

busbar

(left) Mercury Cell Application, (right) Electro-Furnace Application

 

High Temperature Heat Run
After operating for 30 days at 160°C for 1,000 cycles, no appreciable increase in contact resistance was found. Operating temperature of switches is generally below 100°C.

Temperature Rise
With deliberate overload the temperature rise in the switch was far less than that of the bus bar.

disconnect switch Lab Testing Large Gang Switch


dc Switching
After 1,000 cycle no signs of arcing were found on main contacts. Wear on arcing contacts was not enough to make them inoperable.

Overload Switching
Switch modules rated at 6000 ampere were opened and closed momentarily under loads of 10,000, 20,000 and 25,000 ampere. There was no deterioration of the arcing contacts, no arc transference to main contacts, no increase in contact resistance, and no change in operating torque.


isolation switch Home Page
shorting switch About kA Switch
Type HSM
Type HSME - Enclosed Contacts
Type HVSME - Enclosed Contacts
Typical Applications
Diagrams
Options

kA Switch - 230 Woodmont Rd - Milford, CT 06460
Tel (203) 877-5994 Fax (203) 877-2216
TOLL FREE (877) 877-5252

 

Kilo Ampere Switch specializes in the design and manufacture of high current switches and flexible jumpers. Emphasis is on custom designed applications. The Kilo Ampere Switch module design has been used for more than 30 years on fixed installation with currents as high as 500,000 ampere and on portable switches, both air cooled and water cooled, for currents as high as 75,000 ampere. Over the years these switch modules have acquired an enviable reputation of reliable performance. Kilo Ampere Switch is committed to providing a quality product and has achieved registration to ISO 9001.Kilo Ampere Switch high current switch bus bar busbar busbar